|Bullets Manfacturing Process
The manufacturing process used to produce the projectile.
|Best Used For
The Primary or Secondary intended use for the projectile: Hunting, Defense, Target/Competition, Military, Law Enforcement.
The technology used when designing the projectile. For additional information on our technologies, please see our Technology Page.
|Bullet Weight (gr)
The weight of the projectile in grains.
Bullet Length in inches
The primary material used to produce the projectile.
|Ballistic Coefficient (G1)||1.129|
|Notes||Extreme Range Borerider â€” Single shot feed only. OAL in 416 Barret is 5.270"|
|Minimum Twist Rate||1:11|
|Ogive Length (inches)
The curved portion of the bullet that proceeds the bearing surface. For handloaders this dimension can be used to determine minimum projectile protrusion.
|Bullet Minimum Velocity (fps)
The Minimum Velocity required to obtain Terminal Performance.
|Bullet Maximum Velocity (fps)
Bullet MThe Maximum Velocity that the projectile can withstand without structural or performance failure.aximum Velocity (fps)
|Cost Per Round||$1.95|
|Lead Free Bullet||No|
|Manufactured By||Lehigh Defense, LLC|