|Bullets Manfacturing Process
The manufacturing process used to produce the projectile.
|Best Used For
The Primary or Secondary intended use for the projectile: Hunting, Defense, Target/Competition, Military, Law Enforcement.
The technology used when designing the projectile. For additional information on our technologies, please see our Technology Page.
|Bullet Weight (gr)
The weight of the projectile in grains.
Bullet Length in inches
The primary material used to produce the projectile.
|Ballistic Coefficient (G1)||0.161|
|Notes||Not designed nor recommended for the 338 Lapua Magnum / 338 Norma Magnum|
|Minimum Twist Rate||1:10|
|Ogive Length (inches)
The curved portion of the bullet that proceeds the bearing surface. For handloaders this dimension can be used to determine minimum projectile protrusion.
|Bullet Maximum RPM
The Maximum RPM's (Revolutions Per Minute) that the projectile can withstand without structural failure of the projectile. If the Max RPM is not listed, then the projectile is safe to use up to the listed max velocity.
|Bullet Minimum Velocity (fps)
The Minimum Velocity required to obtain Terminal Performance.
|Cost Per Round||$1.07|
|Cartridge||338 Whisper, 338 Spectre|
|Lead Free Bullet||No|
|Manufactured By||Lehigh Defense, LLC|