|Bullets Manfacturing Process
The manufacturing process used to produce the projectile.
|Best Used For
The Primary or Secondary intended use for the projectile: Hunting, Defense, Target/Competition, Military, Law Enforcement.
The technology used when designing the projectile. For additional information on our technologies, please see our Technology Page.
|Bullet Weight (gr)
The weight of the projectile in grains.
Bullet Length in inches
The primary material used to produce the projectile.
|Ballistic Coefficient (G1)||0.531|
|Minimum Twist Rate||1:8|
|Ogive Length (inches)
The curved portion of the bullet that proceeds the bearing surface. For handloaders this dimension can be used to determine minimum projectile protrusion.
|Bullet Maximum RPM
The Maximum RPM's (Revolutions Per Minute) that the projectile can withstand without structural failure of the projectile. If the Max RPM is not listed, then the projectile is safe to use up to the listed max velocity.
|Bullet Minimum Velocity (fps)
The Minimum Velocity required to obtain Terminal Performance.
|Bullet Maximum Velocity (fps)
Bullet MThe Maximum Velocity that the projectile can withstand without structural or performance failure.aximum Velocity (fps)
|Cartridge||300 Blackout / 300 Whisper®, Fast Twist 308 Winchester|
|Lead Free Bullet||Yes|
|Safety Notes||Single shot and bolt action applications only / Suppressor Safe|
|Manufactured By||Lehigh Defense, LLC|