0: $ 0.00

380 Auto 90gr Xtreme Penetrator Ammunition

380 Auto 90gr Xtreme Penetrator Ammunition

SKU : 07380090S

$ 29.50

  • Cartridge: 380 Auto
  • Bullet weight (gr): 90
  • FTM - Fluid Transfer Monolithic
  • Box qty: 20
  • Velocity (fps): 950
  • OAL (in): 0.950
  • Penetration (in): 17.0
  • Wound cavity (in): 1.00

Utility Patent Pending

Design Patent Approved - Patent No: US D748,220 S

Dry cycling tips,click below.



Note:  The Bullet and Velocity were increased to compensate for Firearm Manufacturing Variation

• Suppressor Safe — The projectile is machined from solid bar stock. This is not a frangible bullet produced from powdered metal.

The following video shows the feeding capabilities of the 380 XP:

Link to: Compatibility Testing of the 380 XP in various brand name 380 Auto handguns

The following video shows the feeding capabilities of the 380 XP - 5 Guns / 90 Rounds

Link to: https://www.youtube.com/watch?v=OlYs6jvyudk&list=UUX4Vw6XJMpnPgzbf4zNFJMw

Note:  Due to the design of the feed-ramp of the Kahr p380 and cw380 we would not recommend the use of our XP ammuntion with these handguns. Some users have reported intermittent feed problems with the p238 as well.

For Kahr owners we would like to suggest our 380 Controlled Fracturing Ammunition.  The 380 CF's were tested in a p380 and they are reliable.


Due to the unique design of our XP bullets we advise all customers to purchase one box of ammunition to confirm the ammo will cycle in your handgun.

We have tested the ammo in several of the top selling 380’s and our findings have been recorded on several videos located on our YouTube Channel and documented on our website. However, all handguns produced do have minor differences and these differences may or may not affect the performance of your handgun with our 380 XP Ammo.

The 380 Auto handguns listed below cycled our ammunition without failure:

  • SIG 232
  • AMT 380

We did experience problems chambering the first round in the KAHR P380 and CW380. Once the first round was chambered the handguns performed without failure.

Additional Notes:

1. All handguns must be broken-in per the manufacturer’s instructions.
2. Once the handgun is broken-in per the manufacturer’s instructions, it must be properly maintained.
3. Videos of our handgun compatibility testing can be viewed on our website or YouTube Channel.

Xtreme Penetrator

L'audace, l'audace, toujoursl'audace.Audacity, audacity, always audacity.Aphrase that rings true to us here at Lehigh. Audacity to create new products, audacity to redefine terminal performance, audacity to deploy modern manufacturing processes. Audacity has led us to introduce a unique and innovative product, the Xtreme Penetrator (XP)product line, for both handgun and rifles. The progressive nose geometry allows for deep, straight penetration while creating a permanent wound cavity diameter exceeding that of most expanding bullets. To top it off, the bullet is solid Copper and/or Brass able to overcome barriers to penetration; environmentally friendly, target unfriendly, very unfriendly, downright obnoxiously unfriendly.

  • Progressive nose geometry for deep, straight penetration
  • CNC machined from solid Copper and/or Brass to overcome barriers to penetration
  • Radial flutes that force the hydraulic energy inward to build pressure
  • Exceptional acceleration that creates high pressure energy spikes
  • Minimal surface area to increase the force at the point of contact and sharp cutting edges that defeat barriers
  • A permanent wound cavity that is 2 to 4 times greater than flat or ball nose bullets
  • Available for both handguns and rifles
  • Ballistics Testing - FBI Standard 10% Ballistics Gelatin
  • Barrier:  4 Layers of Denim